TWO BIG OLD DRILL PRESSES AND MAKING A WELDING CART!!!

17 332
216
 
نظر
Joe Mamma
Joe Mamma - پیش 18 ساعت
Glad you're finally stateside! Glad to have you! Welcome!
SuperDave
SuperDave - پیش 20 ساعت
Alec, why dont you grind the bolt a lil bit?
CGagnon5
CGagnon5 - پیش 20 ساعت
hahahhah. they seriously didn't know the tape measure feature? that really is bad.
Connery Padilla
Connery Padilla - پیش 3 روز
Flat head screws will work.
aped3
aped3 - پیش 3 روز
Keeping the Old Trade alive !!!
foxrace0985
foxrace0985 - پیش 3 روز
Lol, I knew that about tape measures...but someone told me, I didn't know for the longest time..
xios42
xios42 - پیش 3 روز
Did you make a video of the concrete pour?
Geffrei Maudeleyne
Geffrei Maudeleyne - پیش 3 روز
Excellent job guys.
RobSchneiderIsAStapler
RobSchneiderIsAStapler - پیش 4 روز
I happen to know for a fact that Will didn’t really get shocked other than it being an obvious good joke. I’ve gotten electrocuted by 110V and you can’t really immediately free yourself, you kind of freeze up for a good five seconds just shaking lol. I did it on a part which I didn’t think had any current going through it, and I swear I sat there with my arm shaking for a good ten seconds before I realized it was electricity doing it.
zonky85
zonky85 - پیش 4 روز
Guys, Just flip that tank plate over. It'll still pivot to let you roll the tank on, just at a slightly higher slope!
Alpha Machina
Alpha Machina - پیش 4 روز
Those Fireball jigs really do take you a step in the right direction from fabricobbling to actual, honest-to-goodness fabricating.
GloomShroom
GloomShroom - پیش 4 روز
Heard the crinkling of the wiring and cringed so hard...
shawn figueroa
shawn figueroa - پیش 5 روز
I'll be that guy. I love this series of videos alot more than the last sword you made. It was fun until the inlay videos became tedious.
Electric paisy
Electric paisy - پیش 5 روز
I didn't new the tape measure thing! 😲
ThomCat316
ThomCat316 - پیش 5 روز
"Big" drill presses? I've got three of those Delta in the step-pulley version, two floor and one bench. All of them had the same wiring issue yours did, it's simply age...
The big drill press has to be moved with a forklift - Clausing 22V 20" with Reeves variable speed control (think it's the same as your VS (make sure to run the speeds every time you use it) and mechanical power downfeed.
PS - stick with aluminium; you're British, the American pronunciation sounds odd...
TEIS3210
TEIS3210 - پیش 5 روز
Lol@ the measyring tape thing hahaha how did u work with steel for so long and not know this
ghost
ghost - پیش 5 روز
I really admire your work, I know myself that I would never be able to do anything you do in your videos, I respect your effort and the amount of work you took to get here. ALL WHILE ENTERTAINING EVERY VIEWER!!! You are a model person and I thank you very much
Derrick Rijksen
Derrick Rijksen - پیش 5 روز
he alec, wy don't you geys buy a forklift of your own, they arent exspansif ( atleest not here in holland) and......sorry for my bad englis
Dom Crooke
Dom Crooke - پیش 5 روز
Please please please pronounce aluminium how the proper way. The British way, the way you was taught 😉
MKS Custom Creations
MKS Custom Creations - پیش 5 روز
On the roll on cart just weld those carriage bolts in and grind the heads off so you have the clearance for the bottle.
Neko Rivera
Neko Rivera - پیش 6 روز
Spotweld the bolt and grind down the bolt heads and the tank will enter without having to carry it.
tin
tin - پیش 6 روز
Don't say aluminum Alec, you're better than that.
I am squidward
I am squidward - پیش 6 روز
his hair it does not feel right when its down
Jordan D
Jordan D - پیش 6 روز
You could have just got a ZTFab cart.
Terry Kotschwar
Terry Kotschwar - پیش 6 روز
You have a Master Forge Guru from the UK and a Master Knife Guru from the US...can you make a hybrid Commando knife which is both US/UK related? Former Sgt. from the 4th Infantry Division (M). I think you have the tools...now make them work!
Tsunauticus III
Tsunauticus III - پیش 6 روز
You 16 or 43?
Can’t tell
Nathaniel Lavery
Nathaniel Lavery - پیش 6 روز
Omg the bus doesn't go where you live does it alex
skyler lehmkuhl
skyler lehmkuhl - پیش 6 روز
The music at 6:44 reminds me of the Futurama theme.
67fishbig
67fishbig - پیش 6 روز
I don't believe you didn't know that.....lmao
Charlotte
Charlotte - پیش 6 روز
Nice new haircut
Blake McBride
Blake McBride - پیش 6 روز
I have one very, very similar to the second (larger) one you have; it was a 1947 piece (Delta/Rockwell). I did a full restoration on it and it's a BEAST. Love it.
Gary Koite
Gary Koite - پیش 6 روز
You can remake that bottom plate for the tank and have the angle that attaches to the frame on the outside instead of the inside. That might give you enough room to roll the tank in.
Dan Reardon
Dan Reardon - پیش 6 روز
Al you mini um
9yr old freedom fighter
9yr old freedom fighter - پیش 6 روز
Hvg
Aidan F
Aidan F - پیش 6 روز
Feel like a coming out the closet moment is coming.
Loïc Rebts
Loïc Rebts - پیش 7 روز
I only recently learned about that thing with tape measures, too... at 28. I understand the embarrassment ^^
Adam Král
Adam Král - پیش 7 روز
God damnit stay Brittish :D ALUMINIUM!
truly1676
truly1676 - پیش 7 روز
Ummm... yes can we get an exact number on a HECK TON please hahaahhhhaaAAAHHaaa.
Jamie M
Jamie M - پیش 7 روز
I was going to mention the shim at the end of the measuring tape, but figured you knew already.
So, since you didn't know, I'll also mention that letting it snap back can loosen the shim by causing the rivets to tear into the tape, throwing your measurements off even more in the future. Next time I notice something I'll mention it right away. My bad, Alec!
Copenhagen King
Copenhagen King - پیش 7 روز
That definately came out of a woodshop 😂
abby ehrenstein
abby ehrenstein - پیش 7 روز
Your drill presses look like the only ones we have in our shop except ours have tons of drill bit craters. I still love them and they are always satisfying to to drill with. Just found your channel from the title of this video and am loving it.
Timber land
Timber land - پیش 7 روز
Fireball tools was not very original.. they allready existed in the 70's in germany
Kane Alan
Kane Alan - پیش 7 روز
Song on 4:40?!?! Any one!!?!
Benjamin Mellor
Benjamin Mellor - پیش 7 روز
Good job on Trending.
Dan Johnson
Dan Johnson - پیش 7 روز
Need an Alec perfect blade soon sir, jonesing for some sharpe metal perfection..........
Geno Lucero
Geno Lucero - پیش 7 روز
Will is awesome always doing the grunt work, everyone needs a Will.
T wagner
T wagner - پیش 7 روز
Montana may be beautiful but not really known as an industrial area with a lot of machining equipment like there is around Detroit. I live about 100 miles away in Ohio and there is still a lot of auto manufacturing here.
Tanner Mack
Tanner Mack - پیش 7 روز
It's aluminium, not aluminum.
JolleyGreenGiant
JolleyGreenGiant - پیش 7 روز
can you combine 3 types of metal?
Rogue Reaper
Rogue Reaper - پیش 7 روز
Hey Alec, do you ever forge off camera? And how did you get into it
Dill Wiggle
Dill Wiggle - پیش 7 روز
Hey you both got buzz cuts !
Claus Madsen
Claus Madsen - پیش 7 روز
Jeez. You didn’t know that about tape measures?? I’m lost for words. With the skills you have I would never have thought you hadn’t realized this 10 years ago
DENIS REEVES
DENIS REEVES - پیش 7 روز
Starting to get fed up to yanky
James Woodrum
James Woodrum - پیش 7 روز
Have you looked at ribbon burner forges? Was thinking about building one. What are your thoughts?
Connor Bell
Connor Bell - پیش 7 روز
Spokane represent!!!!!! Fireball tools for the win!
Donovan Chaas
Donovan Chaas - پیش 7 روز
I remember when I bought my old delta dp220. I carried that heavy SOB 50 or so yards through my yard to my shop. I was only 14 at the time, it was brutal.
Andrea Berton
Andrea Berton - پیش 7 روز
Why don't you make a supersteel sword ? (Sorry if my English isn't perfect but i'm from Italy)
Elias Stenbråten
Elias Stenbråten - پیش 7 روز
Could you get a shop in Norway please?
Volvirth
Volvirth - پیش 7 روز
Alec...
How many measuring tapes did you ruin by hammering rivets shut? :'D
Skymon Gaming
Skymon Gaming - پیش 7 روز
God I wish I had sceneries like that in Bradford 😒
nadnerb978
nadnerb978 - پیش 7 روز
You guys didn't know how the hook on a tape works! Dude...dude...dude. Now you need to make a jig that allows you to test your push/pull measurement per tape. Every woodshop has one (usually tests at the 12" mark, at the primary edge not the leading one). Gotta standardize your metrology! LOL! keep up the good work! Rock on!
Kinu Grove
Kinu Grove - پیش 7 روز
Cool to see this video was at one point all the way up to #27 on Trending.
Evan Hollandsworth
Evan Hollandsworth - پیش 7 روز
please do the big enough meme (cowboy screaming in the sky) for the intro one day
Kurt Lee
Kurt Lee - پیش 7 روز
electrician here been in the building trade about 15 years and i definitely of course absolutely did know about that with the tapes
Mark O'Connell
Mark O'Connell - پیش 7 روز
Just pronounce aluminum the way you normally would. Your accent is fun to hear.. also say zed instead of zero. Say atall instead of at all.
Mark O'Connell
Mark O'Connell - پیش 7 روز
Have him replace all the wires
thisoneisforcommenting ok
thisoneisforcommenting ok - پیش 7 روز
220 in murica
whaatttttt
Mark O'Connell
Mark O'Connell - پیش 7 روز
It’s been 2 days, I need a new video from you on what things you did since the last video..
mehmetali ateş
mehmetali ateş - پیش 7 روز
Can u forge a Obsidian?
DARKKSLAYER
DARKKSLAYER - پیش 7 روز
Try making a gun
Rainbow Nation
Rainbow Nation - پیش 7 روز
Do you plan on doing any forging in 2019?
katy kern
katy kern - پیش 7 روز
Good progress on your shop man. Keep cracking on! I was wondering if you were ever going to start selling those forge burners from Australia again?
Magne Polden
Magne Polden - پیش 7 روز
Hi. congrats on two good machines. It seems as you are doing well. But at 2 min 35 one can see at the left in the image, an extension cord on a selfwinding drum. Be careful, using such equiepment, as the cable get hot on the drum when electric loaded, and can possibly melt the cable, or worse, catch fire.
BENJAMIN DE JONGE
BENJAMIN DE JONGE - پیش 7 روز
Seen Devils Tower yet, a must see
Michael-James Breslin
Michael-James Breslin - پیش 7 روز
You need to put some real blue wheels and casters on that cart
Toby Hughes
Toby Hughes - پیش 7 روز
I miss the old Alec. Hurry up and start smashing out sweet knives!
Shawn Paulson
Shawn Paulson - پیش 8 روز
Anyone know what happened with Alec hiring a videographer / editor? 
Also - I've got a filler video concept - make a few forges. One for small stock and another for swords. Thoughts?
Corey Chapman
Corey Chapman - پیش 8 روز
i would love to know how you got into black smithing in the uk, i live down in dorset and this would be something id love to take up as a career. :)
AnonAdept
AnonAdept - پیش 8 روز
When you get sick of winter come on over to Oregon, think you'd be a good fit.
Slavik Cher
Slavik Cher - پیش 8 روز
I want to see a Damascus steel axe or hatchet. Would be amazing and very useful tool
Will Marcum
Will Marcum - پیش 8 روز
hey Alec I was rewatching your chef's knife build from last year, and I noticed you have one of the Grimsmo pens! How do you like the canadian cnc engineering?
Alex
Alex - پیش 8 روز
Nice to know he can say Spokane right
John Souza
John Souza - پیش 8 روز
So tape measures, I knew that. Also, because of the flexibility of that tip it's important to not let the tape retract all the way in. Stop it just before the tip hits home so as to keep that tip from breaking off.
нαкυ Valadéz
нαкυ Valadéz - پیش 8 روز
Yesss my fav YouTuber finally uploaded 🌹🔥🔥🔥
Earthenfist
Earthenfist - پیش 8 روز
YOU FINALLY GOT A DRILL PRESS! Oh I'm so PROUD of you!
pi57105 Hi
pi57105 Hi - پیش 8 روز
@Alec Steele do you have any first hand Experience with Sonic Tools
ATV maddness
ATV maddness - پیش 8 روز
Alec you should come to wisconsin
DarthRevan
DarthRevan - پیش 8 روز
Don’t you mean fabcobling lol
Hinanolaulii22
Hinanolaulii22 - پیش 8 روز
Lol 😂. I knew that!
J Lee
J Lee - پیش 8 روز
Fire Ball tools, not FiBull, speak American Alec
besteversaw
besteversaw - پیش 8 روز
#35 ON TRENDING! Congrats Alec on making the trending page.
ibeat theleaves
ibeat theleaves - پیش 8 روز
I didn't know the tape measure thing
MOSES350
MOSES350 - پیش 8 روز
Everybody is on about the slab. And here I sit wondering about that mailbox.
Cam P
Cam P - پیش 8 روز
You should try and make a knife out of metal shavings (idea from green beetle).
Christopher Sexton
Christopher Sexton - پیش 8 روز
Nice video keep em rolling
Saiahzion
Saiahzion - پیش 8 روز
Alec will you hang up my Alaskan flag in the workshop????????
Barry Lochridge
Barry Lochridge - پیش 8 روز
Cut the heads off your bolts and weld them through with a thinner plate. Should still hold and you get your fancy schmancy bottle foot back!
dakotamax2
dakotamax2 - پیش 8 روز
I almost miss the Viking Sword build. Gone are the daily posts from the Barker St. days.
Barry Smith
Barry Smith - پیش 8 روز
For the welding cart, use plow bolts to fix your space issue.
FuriousHydra252
FuriousHydra252 - پیش 8 روز
Yeah... You have ear protection but we don’t I plan to sue.
بعدی